Emission Control

UREA is a complete Selective Catalytic Reduction (SCR) system for any vehicle. Pipes (up to six meters long) can be thermoformed like standard fuel pipes. Tight-bending radii and small external diameters create extra space, and the urea conveyer, filler and ventilation pipes can be fitted with a wide range of clips or retaining elements. We solved AdBlue’s freezing problem by integrating heating wires that unfreeze the urea directly after the engine starts and keeps it liquid while the vehicle is moving.
• Impressive client portfolio demonstrating trust and high proficiency. Many OEMs and Tier 1 suppliers have selected NORMA Group as their global development partner of SCR technology
• A notable product portfolio with the ability to provide a complete SCR system in any vehicle
• Small external diameter and tight bending radius providing more available space
• UREA conveyer and filler and ventilation pipes can be easily attached to vehicles
• Electrical wiring and connections can be adapted to individual requirements of any vehicle
• Every product is thoroughly tested in the NORMA Group state-of-the-art lab
• This product is being constantly and continuously developed and improved

RS/RSGU

RS/RSGU pipe retaining clips are the ideal retaining elements for pipes, cables, cable harnesses, cable protection pipes, hoses and other applications.

The FTS (Fuel Transport System) is a tube system connecting fuel feed lines and fuel return lines from fuel tank to the engine. Whether for diesel or benzene engines, any OEM can use the FTS to connect the fuel tank to the engine.
By using the crucial Low Emission Tube (LET) tube component with the FTS, emissions are greatly reduced through its technologically advanced and environmentally friendly material.
So why do our customers need the FTS? Find out below what advantages you can benefit from.
• Competitive price
• Wide variety of quick connector sizes from 7.89–15.82 mm
• Can offer knowledge and the complete solution
• Full in-house production – we produce the entire system on our own from connectors to fuel lines to multi-layer lines.
• Low assembly rates
• Low permeation rate
• Can be connected with any SAE connector
• LET tube key component meets high requirement for a competitive price
• Reduces weight
• Quick to produce prototypes
• State-of-the-art lab to test products on request

QUICK S

S plastic quick connectors are the ideal means for connecting media carrying lines in combustion engines. It has been especially developed for fuel system applications and is characterized by its' "click" sound as well as its' quick and safe connection.

• Media: Fuel,Oil, UREA, Air .
• Operating temperature: -40°C to 125°C.
• Pressures: 0 to 6.8 bar overpressure. 10.34 bar validated according to SAEJ2044 4.
• Very high withdrawal force through four locking points.
• Colored retainer clips available in black, green, yellow, red, blue and natural.

SINGLE-LOCK (SAE QUICK CONNECTOR)

For applications in fuel lines (feed and return), vapor and venting lines, vacuum brake lines, SCR lines, Blow-by.

• Easy to connect
• Temperature resistance from -40°C to 125°C (150°C peak)
• Compact design
• Validated by major OEMs

SAE QUICK CONNECTOR WITH SECONDARY LATCH

For applications in fuel lines (feed and return), vapor and venting lines.

• Easy to connect
• Double-latch mechanism
• Poka-Yoke function to verify good connection
• Temperature resistance from -40°C to 125°C (150°C peak)
• Compact design
• Disconnection without tooling

CARTRIDGE (SAE QUICK CONNECTOR)

For applications in fuel lines (feed and return), vapor and venting lines.

• Direct quick connection between the stem and an equipment
• Simple assembly process
• Manual disconnection of the stem
• Compact solution

RS/RSGU

RS/RSGU pipe retaining clips are the ideal retaining elements for pipes, cables, cable harnesses, cable protection pipes, hoses and other applications.

The TFS is delivered and produced specifically to meet customer needs and guides. The tank filler tube (TFS) transports a medium (fuel, diesel or gasoline) through the tank inlet to reach the fuel tank.
We supply complete fuel systems including:
• Fuel transportation lines
• Ventilation lines
• Underbody lines and bundles
• Purge and purge valve lines
• Mono- & multilayer tubing smooth- & corrugated

RS/RSGU

RS/RSGU pipe retaining clips are the ideal retaining elements for pipes, cables, cable harnesses, cable protection pipes, hoses and other applications.

A member of the fuel application family, TVS operates in Tank Ventilation Tube Systems. Its sole purpose is to ensure that a bare minimum of gases is released in the environment.
A crucial part to any tank manufacturer, the TVS meets necessary requirements and is easily connected with many essential standard parts.
Naturally, the TVS is a component of a larger available solution. Making every day a little easier for you and saving precious minutes, you can be sure that at NORMA Group you can receive an entire solution and expertise from one single source.
• Competitive price: Competitors buy parts and we have them
• Quick to produce prototypes, in-house prototype shop
• Quick feedback from one source: engineers and specialists sit in one location
• Reduces weight
• Quick to produce prototypes
• Produce V2 on our own
• Easy assembly

QUICK V2

V2 plastic quick connectors are an ideal means to connect fuel ventilation lines in the automotive industry. The connectors can be used for both line-to-line and line-to-device connections. They can be applied on both plastic and metal spigots.

• Quick assembly time equaling cost reduction.
• Automated production, no human factor means less margin of error.
• No tools needed.
• Compact dimensions allowing ease of use in narrow spaces.
• An integrated seal provides optimal tightness.
• All seals can be visually checked, permitting safe assembly.
• Featuring extremely low permeation rates.

SINGLE-LOCK (SAE QUICK CONNECTOR)

For applications in fuel lines (feed and return), vapor and venting lines, vacuum brake lines, SCR lines, Blow-by.

• Easy to connect
• Temperature resistance from -40°C to 125°C (150°C peak)
• Compact design
• Validated by major OEMs

SAE QUICK CONNECTOR WITH SECONDARY LATCH

For applications in fuel lines (feed and return), vapor and venting lines.

• Easy to connect
• Double-latch mechanism
• Poka-Yoke function to verify good connection
• Temperature resistance from -40°C to 125°C (150°C peak)
• Compact design
• Disconnection without tooling

CARTRIDGE (SAE QUICK CONNECTOR)

For applications in fuel lines (feed and return), vapor and venting lines.

• Direct quick connection between the stem and an equipment
• Simple assembly process
• Manual disconnection of the stem
• Compact solution

RS/RSGU

RS/RSGU pipe retaining clips are the ideal retaining elements for pipes, cables, cable harnesses, cable protection pipes, hoses and other applications.

Reducing exhaust gas emission is a priority. With the SAS (Secondary Air tube Systems), air is added into engine combustion through suction pipes and pressure pipes. SAS is used in gasoline engine vehicles as well as for the transport of secondary air.
In order to improve the oxidation process of the pollutants in the catalyst during the warm-up phase as well as reduce the initiation time, fresh air (secondary air) is injected and initiates a post-combustion.
With an extensive range of standard components, SAS offers a solution tailored specifically to space-related conditions.
• Low price
• Low weight
• High flexibility
• Quick and easy installation in the vehicle
• Full in-house production from prototype to serial phase
• Temperature range from -40°C to +150°C

QUICK V2

V2 plastic quick connectors are an ideal means to connect media carrying lines as well as ventilation and exhaust lines in the automotive industry. The connectors can be used for both line-to-line and line-to-device connections. They can be applied on both plastic and metal spigots.

• Quick assembly time equaling cost reduction.
• Automated production, no human factor means less margin of error.
• No tools needed.
• Compact dimensions allowing ease of use in narrow spaces.
• An integrated seal provides optimal tightness.
• All seals can be visually checked, permitting safe assembly.
• Featuring extremely low permeation rates.

RSGU

RS/RSGU pipe retaining clips are suitable for all kinds of fastening and retaining applications: pipes, cables, cable harnesses, cable protection pipes, hoses and other lines.

• Easy installation and secure fastening
• Reinforced band ends for extremely high mechanical loads
• Rubber profile protects against vibrations and creeping water, is sound-absorbent and protects against contact corrosion
• No single parts for the customer

TORRO^®

A non-perforated worm-drive hose clamp ideally suited to applications with high mechanical loads.

• Multi-range hose clamp.
• Material: W1, W2, W3, W3, W5.
• Chronium VI free:compliant with ROHS.
• Clamping ranges to DIN 3017: 8-16 mm up to 140-160 mm.
• Larger diameter upon request.

RS/RSGU

RS/RSGU pipe retaining clips are the ideal retaining elements for pipes, cables, cable harnesses, cable protection pipes, hoses and other applications.

The CVS can be used in petrol and diesel engine motor vehicles. In order to protect the environment from the escape of harmful oil vapors and gases, the CVS leads these oil vapors and gases from the cylinder cover to the intake manifold of the combustion.
With an extensive range of standard components, we offer tailored solutions especially designed for tight installation conditions. The CVS is characterized by its low weight, high flexibility and quick and easy installation. Automobile industry customers include high-end brands such as Volkswagen, Audi, Bentley, Maseratti, BMW. The CVS is recyclable according to ELV regulations.
• Low weight.
• High flexibility.
• Quick and easy installation.

QUICK V2

V2 plastic quick connectors are an ideal means to connect media carrying lines as well as ventilation and exhaust lines in the automotive industry. The connectors can be used for both line-to-line and line-to-device connections. They can be applied on both plastic and metal spigots.

• Quick assembly time equaling cost reduction.
• Automated production, no human factor means less margin of error.
• No tools needed.
• Compact dimensions allowing ease of use in narrow spaces.
• An integrated seal provides optimal tightness.
• All seals can be visually checked, permitting safe assembly.
• Featuring extremely low permeation rates.

SINGLE-LOCK (SAE QUICK CONNECTOR)

For applications in fuel lines (feed and return), vapor and venting lines, vacuum brake lines, SCR lines, Blow-by.

• Easy to connect
• Temperature resistance from -40°C to 125°C (150°C peak)
• Compact design
• Validated by major OEMs

SAE QUICK CONNECTOR WITH SECONDARY LATCH

For applications in fuel lines (feed and return), vapor and venting lines.

• Easy to connect
• Double-latch mechanism
• Poka-Yoke function to verify good connection
• Temperature resistance from -40°C to 125°C (150°C peak)
• Compact design
• Disconnection without tooling

CARTRIDGE (SAE QUICK CONNECTOR)

For applications in fuel lines (feed and return), vapor and venting lines.

• Direct quick connection between the stem and an equipment
• Simple assembly process
• Manual disconnection of the stem
• Compact solution

RS/RSGU

RS/RSGU pipe retaining clips are the ideal retaining elements for pipes, cables, cable harnesses, cable protection pipes, hoses and other applications.

VAC systems from NORMA Group support various control lines applications like: Engine management, Boost-pressure control for exhaust-gas, Turbo-charger, Valves, Sensors, exhaust flap, bypass lines, connection pipe from vacuum pump to brake booster. We count with various customer references.
• Vacuum resistant up to 94KPa (940 mbar) Medium: Air.
• Temperature range: –35°C to +120°C for PA 12 (short term to +140°C) (….+135°C / short term to +150°C).
• Higher temperature with heat protection
• Burst pressure > 10 bar
• Torque > 1,5 Nm
• Assembling force < 70 N 7. Pull-off force: Under normal conditions > 500 N, at – 35 °C > 500 N, at 110 °C > 200 N

QUICK V2

V2 plastic quick connectors are an ideal means to connect media carrying lines as well as ventilation and exhaust lines in the automotive industry. The connectors can be used for both line-to-line and line-to-device connections. They can be applied on both plastic and metal spigots.

• Quick assembly time equaling cost reduction.
• Automated production, no human factor means less margin of error.
• No tools needed.
• Compact dimensions allowing ease of use in narrow spaces.
• An integrated seal provides optimal tightness.
• All seals can be visually checked, permitting safe assembly.
• Featuring extremely low permeation rates.