Passenger
Vehicles

UREA is a complete Selective Catalytic Reduction (SCR) system for any vehicle. Pipes (up to six meters long) can be thermoformed like standard fuel pipes. Tight-bending radii and small external diameters create extra space, and the urea conveyer, filler and ventilation pipes can be fitted with a wide range of clips or retaining elements. We solved AdBlue’s freezing problem by integrating heating wires that unfreeze the urea directly after the engine starts and keeps it liquid while the vehicle is moving.
• Impressive client portfolio demonstrating trust and high proficiency. Many OEMs and Tier 1 suppliers have selected NORMA Group as their global development partner of SCR technology
• A notable product portfolio with the ability to provide a complete SCR system in any vehicle
• Small external diameter and tight bending radius providing more available space
• UREA conveyer and filler and ventilation pipes can be easily attached to vehicles
• Electrical wiring and connections can be adapted to individual requirements of any vehicle
• Every product is thoroughly tested in the NORMA Group state-of-the-art lab
• This product is being constantly and continuously developed and improved

The FTS (Fuel Transport System) is a tube system connecting fuel feed lines and fuel return lines from fuel tank to the engine. Whether for diesel or benzene engines, any OEM can use the FTS to connect the fuel tank to the engine.
By using the crucial Low Emission Tube (LET) tube component with the FTS, emissions are greatly reduced through its technologically advanced and environmentally friendly material.
So why do our customers need the FTS? Find out below what advantages you can benefit from.
• Competitive price
• Wide variety of quick connector sizes from 7.89–15.82 mm
• Can offer knowledge and the complete solution
• Full in-house production – we produce the entire system on our own from connectors to fuel lines to multi-layer lines.
• Low assembly rates
• Low permeation rate
• Can be connected with any SAE connector
• LET tube key component meets high requirement for a competitive price
• Reduces weight
• Quick to produce prototypes
• State-of-the-art lab to test products on request

QUICK S

S plastic quick connectors are the ideal means for connecting media carrying lines in combustion engines. It has been especially developed for fuel system applications and is characterized by its' "click" sound as well as its' quick and safe connection.

• Media: Fuel,Oil, UREA, Air .
• Operating temperature: -40°C to 125°C.
• Pressures: 0 to 6.8 bar overpressure. 10.34 bar validated according to SAEJ2044 4.
• Very high withdrawal force through four locking points.
• Colored retainer clips available in black, green, yellow, red, blue and natural.

QUICK V2

V2 plastic quick connectors are an ideal means to connect fuel ventilation lines in the automotive industry. The connectors can be used for both line-to-line and line-to-device connections. They can be applied on both plastic and metal spigots.

• Quick assembly time equaling cost reduction.
• Automated production, no human factor means less margin of error.
• No tools needed.
• Compact dimensions allowing ease of use in narrow spaces.
• An integrated seal provides optimal tightness.
• All seals can be visually checked, permitting safe assembly.
• Featuring extremely low permeation rates.

QUICK V3

The V3 is designed for coolant vent lines. To guarantee that the product can resist cooling-water, the V3 is made two parted. The housing is made of materials resistant to cooling water and the lock ring is made of flexible material.

• Simple Design.
• Cost effective and reliable.
• No tool required.
• To save space, it only has a half locking ring and is designed with an anti-rotation feature.

QUICK MK

MK Connectors have primarily been develpoed to reduce permeation rates. Compared with standard connectors that are prone to high permeation rates and constant micro leackage, MK provides the perfect link between the tank and the pipe system. The MK is not a standard part. All projects are based on specific customer requirements. We are therefore pleased to recieve a description of your application in order to offer you an optimal, cutomized solution.

• Competitive price.
• Can offer the complete solution and knowledge.
• Full in-house production - we produce the entire system on our own from connectors to fuel lines to multi-layer lines.
• Easy assembly.
• Low permeation rate.
• LET tube key component meets high requirement for a competitive price.
• Reduces weight.
• State-of-the-art lab to test products on request.
• Conductive PA is possible.

SINGLE-LOCK (SAE QUICK CONNECTOR)

For applications in fuel lines (feed and return), vapor and venting lines, vacuum brake lines, SCR lines, Blow-by.

• Easy to connect
• Temperature resistance from -40°C to 125°C (150°C peak)
• Compact design
• Validated by major OEMs


Get more detailed information in our Product Finder.

SAFE-LOCK (SAE QUICK CONNECTOR)

For applications in fuel lines (feed and return), vapor and venting lines.

• Easy to connect
• Double-latch mechanism
• Poka-Yoke function to verify good connection
• Temperature resistance from -40°C to 125°C (150°C peak)
• Compact design
• Disconnection without tooling


Get more detailed information in our Product Finder.

CARTRIDGE (SAE QUICK CONNECTOR)

For applications in fuel lines (feed and return), vapor and venting lines.

• Direct quick connection between the stem and an equipment
• Simple assembly process
• Manual disconnection of the stem
• Compact solution


Get more detailed information in our Product Finder.

SMOOTH TUBES

Mono Layer: PA 12, PA6, PA612, PA610, PA11, PPA-I Multi Layer Tube (MLT) 2 or more layers e.g. NORMAMID LET (Low Emission Tubes) for permeation optimized systems with barrier layers (e.g. EVOH, PVDP) for Fuel or Cooling Water PA612/EVOH/PA6, PA12/PVDF/PA12, PA12/PA6, etc.

• Higher pressure applications.
• Low production costs.
• No special toolings.
• ID: 2….12mm (20mm)

CORRUGATED TUBES

Mono Layer: PA 12, PA6, PA612, PA610, PA11, PPA-I Multi Layer Tube (MLT) 2 or more layers e.g. NORMAMID LET (Low Emission Tubes) for permeation optimized systems with barrier layers (e.g. EVOH, PVDP) for Fuel or Cooling Water PA612/EVOH/PA6, PA12/PVDF/PA12, PA12/PA6, etc.

• Low pressure applications.
• Flexible, small radi.
• Jump in diameters.
• ID:… 33mm (53mm).

RSGU

RS/RSGU pipe retaining clips are suitable for all kinds of fastening and retaining applications: pipes, cables, cable harnesses, cable protection pipes, hoses and other lines.

• Easy installation and secure fastening
• Reinforced band ends for extremely high mechanical loads
• Rubber profile protects against vibrations and creeping water, is sound-absorbent and protects against contact corrosion
• No single parts for the customer

The TFS is delivered and produced specifically to meet customer needs and guides. The tank filler tube (TFS) transports a medium (fuel, diesel or gasoline) through the tank inlet to reach the fuel tank.
We supply complete fuel systems including:
• Fuel transportation lines
• Ventilation lines
• Underbody lines and bundles
• Purge and purge valve lines
• Mono- & multilayer tubing smooth- & corrugated

A member of the fuel application family, TVS operates in Tank Ventilation Tube Systems. Its sole purpose is to ensure that a bare minimum of gases is released in the environment.
A crucial part to any tank manufacturer, the TVS meets necessary requirements and is easily connected with many essential standard parts.
Naturally, the TVS is a component of a larger available solution. Making every day a little easier for you and saving precious minutes, you can be sure that at NORMA Group you can receive an entire solution and expertise from one single source.
• Competitive price: Competitors buy parts and we have them
• Quick to produce prototypes, in-house prototype shop
• Quick feedback from one source: engineers and specialists sit in one location
• Reduces weight
• Quick to produce prototypes
• Produce V2 on our own
• Easy assembly

QUICK V2

V2 plastic quick connectors are an ideal means to connect fuel ventilation lines in the automotive industry. The connectors can be used for both line-to-line and line-to-device connections. They can be applied on both plastic and metal spigots.

• Quick assembly time equaling cost reduction.
• Automated production, no human factor means less margin of error.
• No tools needed.
• Compact dimensions allowing ease of use in narrow spaces.
• An integrated seal provides optimal tightness.
• All seals can be visually checked, permitting safe assembly.
• Featuring extremely low permeation rates.

SINGLE-LOCK (SAE QUICK CONNECTOR)

For applications in fuel lines (feed and return), vapor and venting lines, vacuum brake lines, SCR lines, Blow-by.

• Easy to connect
• Temperature resistance from -40°C to 125°C (150°C peak)
• Compact design
• Validated by major OEMs


Get more detailed information in our Product Finder.

SAFE-LOCK (SAE QUICK CONNECTOR)

For applications in fuel lines (feed and return), vapor and venting lines.

• Easy to connect
• Double-latch mechanism
• Poka-Yoke function to verify good connection
• Temperature resistance from -40°C to 125°C (150°C peak)
• Compact design
• Disconnection without tooling


Get more detailed information in our Product Finder.

CARTRIDGE (SAE QUICK CONNECTOR)

For applications in fuel lines (feed and return), vapor and venting lines.

• Direct quick connection between the stem and an equipment
• Simple assembly process
• Manual disconnection of the stem
• Compact solution


Get more detailed information in our Product Finder.

Reducing exhaust gas emission is a priority. With the SAS (Secondary Air tube Systems), air is added into engine combustion through suction pipes and pressure pipes. SAS is used in gasoline engine vehicles as well as for the transport of secondary air.
In order to improve the oxidation process of the pollutants in the catalyst during the warm-up phase as well as reduce the initiation time, fresh air (secondary air) is injected and initiates a post-combustion.
With an extensive range of standard components, SAS offers a solution tailored specifically to space-related conditions.
• Low price
• Low weight
• High flexibility
• Quick and easy installation in the vehicle
• Full in-house production from prototype to serial phase
• Temperature range from -40°C to +150°C

QUICK V2

V2 plastic quick connectors are an ideal means to connect media carrying lines as well as ventilation and exhaust lines in the automotive industry. The connectors can be used for both line-to-line and line-to-device connections. They can be applied on both plastic and metal spigots.

• Quick assembly time equaling cost reduction.
• Automated production, no human factor means less margin of error.
• No tools needed.
• Compact dimensions allowing ease of use in narrow spaces.
• An integrated seal provides optimal tightness.
• All seals can be visually checked, permitting safe assembly.
• Featuring extremely low permeation rates.

SMOOTH TUBES

Mono Layer: PA 12, PA6, PA612, PA610, PA11, PPA-I Multi Layer Tube (MLT) 2 or more layers e.g. NORMAMID LET (Low Emission Tubes) for permeation optimized systems with barrier layers (e.g. EVOH, PVDP) for Fuel or Cooling Water PA612/EVOH/PA6, PA12/PVDF/PA12, PA12/PA6, etc.

• Higher pressure applications.
• Low production costs.
• No special toolings.
• ID: 2….12mm (20mm)

CORRUGATED TUBES

Mono Layer: PA 12, PA6, PA612, PA610, PA11, PPA-I Multi Layer Tube (MLT) 2 or more layers e.g. NORMAMID LET (Low Emission Tubes) for permeation optimized systems with barrier layers (e.g. EVOH, PVDP) for Fuel or Cooling Water PA612/EVOH/PA6, PA12/PVDF/PA12, PA12/PA6, etc.

• Low pressure applications.
• Flexible, small radi.
• Jump in diameters.
• ID:… 33mm (53mm).

FREEFLEX^® TUBES

FREEFLEX®tubing solutions will fit your every specific air duct and drainage line application needs. By using FREEFLEX®technology your installation costs and assembly times will decrease tremendously. FREEFLEX®hoses are made from one piece, reducing the number of possible leaking points and eliminating combinations of steel tubes with TPE hoses. All FreeFlex hoses are recyclable.

• Flattened area
• Rubber material making the hose bendable+easy fit
• Lighter
• Doesn’t transfer vibrations
• No unnecessary heavy connections

SV CONNECTORS

SV products are proven plastic hose and pipe connection components that create secure, reliable and affordable connections in lines used for transporting media. NORMAPLAST® SV hose and pipe connectors are used in the automotive construction industry as well as practically every other industrial sector.

• Extremely strong
• Durable
• Low weight
• Can be used for damping/absorption
• Resistant to abrasion
• Highly resistant to impact

RSGU

RS/RSGU pipe retaining clips are suitable for all kinds of fastening and retaining applications: pipes, cables, cable harnesses, cable protection pipes, hoses and other lines.

• Easy installation and secure fastening
• Reinforced band ends for extremely high mechanical loads
• Rubber profile protects against vibrations and creeping water, is sound-absorbent and protects against contact corrosion
• No single parts for the customer

TORRO^®

A non-perforated worm-drive hose clamp ideally suited to applications with high mechanical loads.

• Multi-range hose clamp.
• Material: W1, W2, W3, W3, W5.
• Chronium VI free:compliant with ROHS.
• Clamping ranges to DIN 3017: 8-16 mm up to 140-160 mm.
• Larger diameter upon request.

COBRA

NORMACLAMP® COBRA products are bolt-free, one-piece hose clips. Their low overall height enables precise installation in even the tightest of spaces. NORMACLAMP® COBRA clamps are quick and easy to install.

• Bolt-free hose clip in one piece
• Quick, easy and safe installation
• Maintenance-free fit

The CVS can be used in petrol and diesel engine motor vehicles. In order to protect the environment from the escape of harmful oil vapors and gases, the CVS leads these oil vapors and gases from the cylinder cover to the intake manifold of the combustion.
With an extensive range of standard components, we offer tailored solutions especially designed for tight installation conditions. The CVS is characterized by its low weight, high flexibility and quick and easy installation. Automobile industry customers include high-end brands such as Volkswagen, Audi, Bentley, Maseratti, BMW. The CVS is recyclable according to ELV regulations.
• Low weight.
• High flexibility.
• Quick and easy installation.

QUICK V2

V2 plastic quick connectors are an ideal means to connect media carrying lines as well as ventilation and exhaust lines in the automotive industry. The connectors can be used for both line-to-line and line-to-device connections. They can be applied on both plastic and metal spigots.

• Quick assembly time equaling cost reduction.
• Automated production, no human factor means less margin of error.
• No tools needed.
• Compact dimensions allowing ease of use in narrow spaces.
• An integrated seal provides optimal tightness.
• All seals can be visually checked, permitting safe assembly.
• Featuring extremely low permeation rates.

SINGLE-LOCK (SAE QUICK CONNECTOR)

For applications in fuel lines (feed and return), vapor and venting lines, vacuum brake lines, SCR lines, Blow-by.

• Easy to connect
• Temperature resistance from -40°C to 125°C (150°C peak)
• Compact design
• Validated by major OEMs


Get more detailed information in our Product Finder.

SAFE-LOCK (SAE QUICK CONNECTOR)

For applications in fuel lines (feed and return), vapor and venting lines.

• Easy to connect
• Double-latch mechanism
• Poka-Yoke function to verify good connection
• Temperature resistance from -40°C to 125°C (150°C peak)
• Compact design
• Disconnection without tooling


Get more detailed information in our Product Finder.

CARTRIDGE (SAE QUICK CONNECTOR)

For applications in fuel lines (feed and return), vapor and venting lines.

• Direct quick connection between the stem and an equipment
• Simple assembly process
• Manual disconnection of the stem
• Compact solution


Get more detailed information in our Product Finder.

SMOOTH TUBES

Mono Layer: PA 12, PA6, PA612, PA610, PA11, PPA-I Multi Layer Tube (MLT) 2 or more layers e.g. NORMAMID LET (Low Emission Tubes) for permeation optimized systems with barrier layers (e.g. EVOH, PVDP) for Fuel or Cooling Water PA612/EVOH/PA6, PA12/PVDF/PA12, PA12/PA6, etc.

• Higher pressure applications.
• Low production costs.
• No special toolings.
• ID: 2….12mm (20mm)

CORRUGATED TUBES

Mono Layer: PA 12, PA6, PA612, PA610, PA11, PPA-I Multi Layer Tube (MLT) 2 or more layers e.g. NORMAMID LET (Low Emission Tubes) for permeation optimized systems with barrier layers (e.g. EVOH, PVDP) for Fuel or Cooling Water PA612/EVOH/PA6, PA12/PVDF/PA12, PA12/PA6, etc.

• Low pressure applications.
• Flexible, small radi.
• Jump in diameters.
• ID:… 33mm (53mm).

RSGU

RS/RSGU pipe retaining clips are suitable for all kinds of fastening and retaining applications: pipes, cables, cable harnesses, cable protection pipes, hoses and other lines.

• Easy installation and secure fastening
• Reinforced band ends for extremely high mechanical loads
• Rubber profile protects against vibrations and creeping water, is sound-absorbent and protects against contact corrosion
• No single parts for the customer

CWS are plastic systems used for cooling water. Combining a variety of products from the extensive NORMA Group portfolio, the CWS creates a cost-effective cooling water system. With an excellent media and chemical resistance especially against hydrolysis, the CWS has high system flexibility.
• Reduces number of joints
• Reduces weight (up to >75%)
• Realizes very small diameters
• High temperature stability -40°C to 135°C

QUICK PS3

PS3 "Push & Seal" plastic quick connectors for charged air, cooling water, and heating hoses.

• Designed for VDA standard spigot.
• Available with hose barb end for use with aftermarket hoses and clamps.
• Material: Injection Molded Thermoplastics, EPDM O-Rings.

SMOOTH TUBES

Mono Layer: PA 12, PA6, PA612, PA610, PA11, PPA-I Multi Layer Tube (MLT) 2 or more layers e.g. NORMAMID LET (Low Emission Tubes) for permeation optimized systems with barrier layers (e.g. EVOH, PVDP) for Fuel or Cooling Water PA612/EVOH/PA6, PA12/PVDF/PA12, PA12/PA6, etc.

• Higher pressure applications.
• Low production costs.
• No special toolings.
• ID: 2….12mm (20mm)

CORRUGATED TUBES

Mono Layer: PA 12, PA6, PA612, PA610, PA11, PPA-I Multi Layer Tube (MLT) 2 or more layers e.g. NORMAMID LET (Low Emission Tubes) for permeation optimized systems with barrier layers (e.g. EVOH, PVDP) for Fuel or Cooling Water PA612/EVOH/PA6, PA12/PVDF/PA12, PA12/PA6, etc.

• Low pressure applications.
• Flexible, small radi.
• Jump in diameters.
• ID:… 33mm (53mm).

RSGU

RS/RSGU pipe retaining clips are suitable for all kinds of fastening and retaining applications: pipes, cables, cable harnesses, cable protection pipes, hoses and other lines.

• Easy installation and secure fastening
• Reinforced band ends for extremely high mechanical loads
• Rubber profile protects against vibrations and creeping water, is sound-absorbent and protects against contact corrosion
• No single parts for the customer

The thermoformed lines ventilating the cooling water circuit is what we call cooling water ventilation (CWV). These thermoformed lines are connected to the cooling water lines at critical areas where air, which is in the cooling water line, can exhaust. If the lines fail to work, the air in the circuit cannot cool and the engine ultimately breaks. This product is recommended to be used in the engine bay of a passenger vehicle.
• Quality – reduces the number of joints
• Cost reduction (part price) by up to 40%
• Reduces assembly time
• Reduces weight by up to 75%
• Realizes very small diameters

QUICK V3

The V3 is designed for coolant vent lines. To guarantee that the product can resist cooling-water, the V3 is made two parted. The housing is made of materials resistant to cooling water and the lock ring is made of flexible material.

• Simple Design.
• Cost effective and reliable.
• No tool required.
• To save space, it only has a half locking ring and is designed with an anti-rotation feature.

RSGU

RS/RSGU pipe retaining clips are suitable for all kinds of fastening and retaining applications: pipes, cables, cable harnesses, cable protection pipes, hoses and other lines.

• Easy installation and secure fastening
• Reinforced band ends for extremely high mechanical loads
• Rubber profile protects against vibrations and creeping water, is sound-absorbent and protects against contact corrosion
• No single parts for the customer

Over the years, these top quality very versatile connectors have been used in millions of different applications and the product has become an indispensable aid to the domestic, commercial and industrial market sectors. SV products are proven plastic hose and tube connectors, which connect fluid carrying lines reliably and at a competitive price.
SV hose and tube connectors are not only used in motor vehicles, but also in nearly every industrial application.
• High strength
• Tough
• Low weight
• Shock damping
• Scuff resistance
• High impact resistance

SV - TAPER THREAD CONNECTOR

These SV connectors made of polyamide 6 feature on one end a tapered thread and on the other end one or two push-on spigots. The ribbed surface of the push-on spigots ensures that the hoses are tightfit after assembly. Three different thread geometries are distinguished by means of color coding allowing for quick visual identification:
• Metric taper thread..............light gray
• Whitworth pipe thread ........charcoal
• NPT thread ........................black
(Other materials are available on request)

SV - HOSE CONNECTORS

These SV connectors without thread hoses are connected quickly and easily with one another by just pushing the hose onto the connectors. The ribbed surface of the push-on spigots ensures that the hoses are tight-fit after assembly. The SV hose connectors are made of ecru-coloured POM (acetalcopolymerisat); other materials are available on request.

SV - COMPRESSION

The SV threaded connectors feature on one end a metric thread and on the other end one or two pipe unions. These compression connectors are made of black polyamide 6 with 30% glass-fibre reinforcement.

SV - PUSH-ON CONNECTORS

These SV parts are used for connecting plastic pipes made of PA6 or PA12. With these connectors safe connections can be achieved even without the use of additional hose clips. The push-on connectors are made of black polyamide 6 or polyamide 12 containing 30% glass-fibre reinforcement. The connectors can be supplied with O-rings on request.

NORMA Group offers its customers with a wide range of engineered clamps, innovative quick connectors and quality hoses-pipes for different media carrying applications. In addition, we can supply an entire system upon customer requirements.
• Highly sophisticated performance.
• Low weight.
• Easy and quick assembly/disassembly.
• High flexibility.
• Recyclable

QUICK V2

V2 plastic quick connectors are an ideal means to connect media carrying lines as well as ventilation and exhaust lines in the automotive industry. The connectors can be used for both line-to-line and line-to-device connections. They can be applied on both plastic and metal spigots.

• Quick assembly time equaling cost reduction.
• Automated production, no human factor means less margin of error.
• No tools needed.
• Compact dimensions allowing ease of use in narrow spaces.
• An integrated seal provides optimal tightness.
• All seals can be visually checked, permitting safe assembly.
• Featuring extremely low permeation rates.

QUICK S

S plastic quick connectors are the ideal means for connecting media carrying lines in combustion engines. It has been especially developed for fuel system applications and is characterized by its' "click" sound as well as its' quick and safe connection.

• Media: Fuel,Oil, UREA, Air .
• Operating temperature: -40°C to 125°C.
• Pressures: 0 to 6.8 bar overpressure. 10.34 bar validated according to SAEJ2044 4.
• Very high withdrawal force through four locking points.
• Colored retainer clips available in black, green, yellow, red, blue and natural.

SMOOTH TUBES

Mono Layer: PA 12, PA6, PA612, PA610, PA11, PPA-I Multi Layer Tube (MLT) 2 or more layers e.g. NORMAMID LET (Low Emission Tubes) for permeation optimized systems with barrier layers (e.g. EVOH, PVDP) for Fuel or Cooling Water PA612/EVOH/PA6, PA12/PVDF/PA12, PA12/PA6, etc.

• Higher pressure applications.
• Low production costs.
• No special toolings.
• ID: 2….12mm (20mm)

CORRUGATED TUBES

Mono Layer: PA 12, PA6, PA612, PA610, PA11, PPA-I Multi Layer Tube (MLT) 2 or more layers e.g. NORMAMID LET (Low Emission Tubes) for permeation optimized systems with barrier layers (e.g. EVOH, PVDP) for Fuel or Cooling Water PA612/EVOH/PA6, PA12/PVDF/PA12, PA12/PA6, etc.

• Low pressure applications.
• Flexible, small radi.
• Jump in diameters.
• ID:… 33mm (53mm).

FREEFLEX^® TUBES

FREEFLEX®tubing solutions will fit your every specific air duct and drainage line application needs. By using FREEFLEX®technology your installation costs and assembly times will decrease tremendously. FREEFLEX®hoses are made from one piece,reducing the number of possible leaking points and eliminating combinations of steel tubes with TPE hoses. All FreeFlex hoses are recyclable.

• Flattened area
• Rubber material making the hose bendable+easy fit
• Lighter
• Doesn’t transfer vibrations
• No unnecessary heavy connections

TORRO^®

A non-perforated worm-drive hose clamp ideally suited to applications with high mechanical loads.

• Multi-range hose clamp.
• Material: W1, W2, W3, W3, W5.
• Chronium VI free:compliant with ROHS.
• Clamping ranges to DIN 3017: 8-16 mm up to 140-160 mm.
• Larger diameter upon request.

RSGU

RS/RSGU pipe retaining clips are suitable for all kinds of fastening and retaining applications: pipes, cables, cable harnesses, cable protection pipes, hoses and other lines.

• Easy installation and secure fastening
• Reinforced band ends for extremely high mechanical loads
• Rubber profile protects against vibrations and creeping water, is sound-absorbent and protects against contact corrosion
• No single parts for the customer

BFS systems are used for transport of battery fluid/gases. Combining NORMAs corrugated or smooth tubes and V2 quick connectors, it suppports our customers fulfill high flammability requirements with high flexibility.
• High system flexibility.
• Excellent media and chemical resistance.

NORMA Group's CAS systems for transport or ventilation of compressed air. How does it work ? The compressed air of the compressor flows in the air reservoir via the pressure regulator which automatically regulates the operating pressure in the tractor‘s air brake system. From the air reservoir the air flows to the solenoid valVe, to the 2-line trailer control valve, to the 1-line trailer control valve and finally to the red coupling head. In the 1-line trailer control valve the pressure is limited to 5,3 bar and is available on this level on the coupling head 1-line.

If a trailer with a 2-line air brake system is connected, the supply pressure of 8,1 bar flows via the red coupling heads to the trailer. At this connection the compressed air passes through the pipe filter and the trailer brake valve and reaches the air reservoir. To supply a second trailer with compressed air, the trailer is equipped with two more coupling heads / supply and brake. These are directly connected to the supply line and the control line in front of the trailer brake valve.
• Highly sophisticated performance.
• Low weight.
• Easy and quick assembly/disassembly.
• High flexibility.
• Excellent value/ price relation.
• Recycling.

This oil filing system is low weight solution that is easy to install and service which will reduce assembly time and increase performance.
• Highly flexible system.
• Various possibilities with NORMA Group's standard components.
• Testing can be done at NORMA Group's test labs.
• Different customer versions available.

QUICK V2

V2 plastic quick connectors are an ideal means to connect media carrying lines as well as ventilation and exhaust lines in the automotive industry. The connectors can be used for both line-to-line and line-to-device connections. They can be applied on both plastic and metal spigots.

• Quick assembly time equaling cost reduction.
• Automated production, no human factor means less margin of error.
• No tools needed.
• Compact dimensions allowing ease of use in narrow spaces.
• An integrated seal provides optimal tightness.
• All seals can be visually checked, permitting safe assembly.
• Featuring extremely low permeation rates.

CORRUGATED TUBES

Mono Layer: PA 12, PA6, PA612, PA610, PA11, PPA-I Multi Layer Tube (MLT) 2 or more layers e.g. NORMAMID LET (Low Emission Tubes) for permeation optimized systems with barrier layers (e.g. EVOH, PVDP) for Fuel or Cooling Water PA612/EVOH/PA6, PA12/PVDF/PA12, PA12/PA6, etc.

• Low pressure applications.
• Flexible, small radi.
• Jump in diameters.
• ID:… 33mm (53mm).

RSV

In addition to the standard RS/RSGU designs we offer a V-feature. This special design, a variation of the standard RS/RSGU Type 1, is provided with an integrated mounting fastener. When the clip ends are compressed the fastener locks into place and locks the clip. Thus, the RS/RSGU clip with V-feature can be easily pre-aseembled on the pipe.

• RSV-RSGUV Range availability.
• High quality fixing element.

RSGU

RS/RSGU pipe retaining clips are suitable for all kinds of fastening and retaining applications: pipes, cables, cable harnesses, cable protection pipes, hoses and other lines.

• Easy installation and secure fastening
• Reinforced band ends for extremely high mechanical loads
• Rubber profile protects against vibrations and creeping water, is sound-absorbent and protects against contact corrosion
• No single parts for the customer

TOC (Transmission Oil Cooler) tube systems are designed for engine and transmission oil cooling.
The product has a flexible tube system connecting the transmission oil cooler and the automatic transmission, and the low push on force makes for easy and quick assembly. As the manufacturer of all components, NORMA Group provides you with one global development partner for the complete system.
• High temperature resistance.
• High burst pressure.
• Good media resistance.
• High flexibility.
• High mechanical strength.
• Decrease part weight by more than 50%.

VAC systems from NORMA Group support various control lines applications like: Engine management, Boost-pressure control for exhaust-gas, Turbo-charger, Valves, Sensors, exhaust flap, bypass lines, connection pipe from vacuum pump to brake booster. We count with various customer references.
• Vacuum resistant up to 94KPa (940 mbar) Medium: Air.
• Temperature range: –35°C to +120°C for PA 12 (short term to +140°C) (….+135°C / short term to +150°C).
• Higher temperature with heat protection
• Burst pressure > 10 bar
• Torque > 1,5 Nm
• Assembling force < 70 N 7. Pull-off force: Under normal conditions > 500 N, at – 35 °C > 500 N, at 110 °C > 200 N

QUICK V2

V2 plastic quick connectors are an ideal means to connect media carrying lines as well as ventilation and exhaust lines in the automotive industry. The connectors can be used for both line-to-line and line-to-device connections. They can be applied on both plastic and metal spigots.

• Quick assembly time equaling cost reduction.
• Automated production, no human factor means less margin of error.
• No tools needed.
• Compact dimensions allowing ease of use in narrow spaces.
• An integrated seal provides optimal tightness.
• All seals can be visually checked, permitting safe assembly.
• Featuring extremely low permeation rates.

SMOOTH TUBES

Mono Layer: PA 12, PA6, PA612, PA610, PA11, PPA-I Multi Layer Tube (MLT) 2 or more layers e.g. NORMAMID LET (Low Emission Tubes) for permeation optimized systems with barrier layers (e.g. EVOH, PVDP) for Fuel or Cooling Water PA612/EVOH/PA6, PA12/PVDF/PA12, PA12/PA6, etc.

• Higher pressure applications.
• Low production costs.
• No special toolings.
• ID: 2….12mm (20mm)

RSGU

RS/RSGU pipe retaining clips are suitable for all kinds of fastening and retaining applications: pipes, cables, cable harnesses, cable protection pipes, hoses and other lines.

• Easy installation and secure fastening
• Reinforced band ends for extremely high mechanical loads
• Rubber profile protects against vibrations and creeping water, is sound-absorbent and protects against contact corrosion
• No single parts for the customer